Clarke CMS10S2 Instrukcje Operacyjne Pobierz pdf (Strona 20)

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

CHECKING AND ADJUSTING THE BEVEL SETTINGS

1. Loosen the bevel clamp handle.

2. Press the saw head to the right to

ensure it is fully vertical and

tighten the bevel clamp handle.

3. Pull down the head until the

blade just enters the kerf plate.

90 DEGREE STOP ADJUSTMENT

4. Place a set square on the table

and up against the blade.

NOTE: Do not touch the tips of the

blade teeth with the square.

If adjustment is required, proceed as

follows:

5. Turn the 90° adjustment stop

screw in or out until the blade is at

90° to the table as shown by the

set square.

6. If the bevel pointer does not

indicate zero on the bevel scale,

loosen the screw that secures the

pointer and move the pointer as

necessary.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Brak uwag

Clarke CMS10S2 Instrukcje Operacyjne Strona 20