Clarke Encore S33XP Instrukcja Operatora Pobierz pdf (Strona 13)

Clarke

Operator's Manual - Encore S28XP/S33XP/S38XP - 13 -

How To Install The Brushes Or Pad Drivers

To install the brushes or pad drivers on the machine,

follow this procedure:

1. Turn the key switch "ON".

2. Put the brush switch in the "UP" position.

3. Turn the key switch "OFF".

4. Go to the front of the machine.

5. Unlatch right and left brush housings and remove

them. See figure #13.

6. Put a brush or pad driver under the brush motor plate.

See figure #14.

7. Align the lugs on the motor gimbal with the slots in the

brush gimbal.

8. Pull the brush up until the gimbal locks.

9. Repeat steps 6, 7, and 8 to install the second brush

or pad driver.

How To Remove The Brushes Or Pad Drivers

To remove the brushes or pad drivers from the

machine,follow this procedure:

1. Turn the key switch "ON".

2. Put the brush switch in the "UP" position.

3. Turn the key switch "OFF".

4. Go to the front of the machine.

5. Push down on two sides of the brush or pad driver until

the gimbals release.

HOW TO PREPARE THE MACHINE FOR OPERATION

Figure #13

Figure #14

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 59 60

Brak uwag

Clarke Encore S33XP Instrukcja Operatora Strona 13