Clarke BOOST 28 Instrukcja Operatora Strona 14

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 124
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 13
EN
ENGLISH
-14- FORM NO. 71483A Clarke
®
Operator’s Manual (EN) - FOCUS II MID-SIZE AUTOSCRUBBER
®
Figure 10
Figure 11
HOW TO PREPARE THE MACHINE
FOR OPERATION
How To Install The Brush Or Pad (BOOST Machine)
To install the brush or pad on the machine, follow this
procedure:
1. Turn the key switch “ON”.
2. Put the brush head assembly in the “Up” position.
3. Turn the key switch “OFF”.
4. Go to the front of the machine.
5. Press on a brush or pad, under the ex plates.
See gure 10.
NOTE: When using a black pad, position pad on head. Lower head
and operate momentarily to af x pad to pad driver (if you have
dif culty, position pad on oor and lower head then operate.)
How To Remove The Brush Or Pad (BOOST Machine)
To remove the brush or pad from the machine, follow this procedure:
1. Turn the key switch “ON”.
2. Put the brush head assembly in the “Up” position.
3. Turn the key switch “OFF”.
4. Go to the front of the machine and pull downward on the brush or
pad until it releases from the ex plates. See gure 11.
Przeglądanie stron 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 123 124

Komentarze do niniejszej Instrukcji

Brak uwag