Clarke 250TE Dokumentacja Pobierz pdf (Strona 15)

GENERAL LAYOUT

Fig.2

SPECIFICATIONS

Please note that the details and specifications contained herein, are correct at the time of

going to print. However, CLARKE International reserve the right to change specifications at any

time without prior notice. ALWAYS CONSULT THE MACHINE’S DATA PLATE

* Duty Cycle: Determines the machine ‘down time’.

220TE 250TE 270TE

Power Supply 230V 50Hz 3Ph 230V 50Hz 3Ph 400V 50Hz 3Ph

Main Fuse Rating 25Amps 40Amps 16Amps

Current Range 40-200A 30-250A 30-260A

Max. Metal Thickness (m/s) 3-4mm 4-5mm 6mm

Welding Wire Sizes 0.6-1.2mm 0.6-1.2mm 0.6-1.2mm

Duty Cycle* 20% 200A - -

30% - 250 -

35% - - 260A

60% 125A 180A 170A

100% 95A 140A 135A

Dimensions (no handle) mm 685x820x500 685x820x500 685x820x500

Weight

Part No. 6015220 6015235 6015240

DUTY CYCLE

These models are covered by regulations EN 60974-1 and EN 50199, where the Duty Cycle

(X) is expressed as a percentage of time the machine may be used in a given period for a

specified welding current.

i.e. using the example below, which is an illustration of the 270TE data plate.....

When welding at 170 Amps the machine may be used for 6 minutes (60%) in any 10 minute

period..........

............or, the machine may be used continuously, (100%) when welding at 135 Amps

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Brak uwag

Clarke 250TE Dokumentacja Strona 15