Clarke 250TE Dokumentacja Pobierz pdf (Strona 19)

PREPARATION FOR USE

A.Electrical Connections

1. NO-GAS WELDING (EN Models ONLY)

IMPORTANT: ENSURE THE ELECTRICAL CONNECTIONS WITHIN THE WELDERS SIDE

COMPARTMENT ARE CORRECTLY CONNECTED...as follows:

Attach the mini gas bottle to the

machine as described in ‘Assembly’

on page 15, then connect up as

follows: (Ref. Fig. 5)

1. Remove the protective cap

from the cylinder outlet and

screw on the regulator (14),

fully, BUT DO NOT OVERTIGHTEN.

2. Simply push the gas hose, at the

rear of the machine, into the

gas regulator outlet, as far as

possible and release. This is a self

sealing coupling.

To remove the hose, hold back the

ring (15) then pull the hose out.

All components are now correctly

Fig.5

attached, and the welder may now be prepared for operation, as follows:

TORCH to the NEGATIVE (-ve) terminal,

EARTH cable to the POSITIVE (+ve)

terminal.

The terminals within the side

compartment are shown in Fig. 6

Fig.6

SPECIFICATIONS

110E 110EN 130EN 135TE

Power Supply(All Models) 230V 50Hz 1Ph 230V 50Hz 1Ph 230V 50Hz 1Ph 230V 50Hz 1Ph

Fuse Rating (All Models) 13Amps 13Amps 13Amps 13Amps

Current Range 30-100A 30-100A 30-130A 30-130A

Max. Metal Thickness 3mm 2-3mm 4-5mm 5mm

Welding Wire Sizes 0.6-0.8mm 0.6-0.9mm 0.6-0.9mm 0.6-0.8mm

Duty Cycle* 8% 100A - 130A 130A

15% - 100A 115A 115A

60% 40A 55A 57A 57A

100% 30A 40A 44A 44A

Dimensions (All Models) 500x280x420mm 500x280x420mm 500x280x420mm 500x280x420mm

Weight 24kg 24kg 24.5kg 28.5kg

Part No. 6015110 6014500 6014530 6015135

Please note that the details and specifications contained herein, are correct at the time of

going to print. However, CLARKE International reserve the right to change specifications at any

time without prior notice. ALWAYS CONSULT THE MACHINE’S DATA PLATE

* Duty Cycle: Determines the machine ‘down time’.

eg MIG130-EN, operating at 57 Amps - Duty Cycle - 60%. This means that in ANY 10 minute period, the

machine may operate for 6 minutes and must have a down time of 4 minutes.

151TE 160EN

Power Supply(All Models) 230V 50Hz 1Ph 230V 50Hz 1Ph

Fuse Rating (All Models) 15Amps 15Amps

Current Range 30-150A 30-150A

Max. Metal Thickness 5-6mm 5-6mm

Welding Wire Sizes 0.6-0.8mm 0.6-0.9mm

Duty Cycle* 10% 150A 150A

20% 130A 130A

60% 75A 75A

100% 55A 55A

Dimensions (All Models) 500x280x420mm 500x280x420mm

Weight 24kg 24kg

Part No. 6015151 6014560

1 2 ... 14 15 16 17 18 19 20 21 22

Komentarze do niniejszej Instrukcji

Brak uwag

Clarke 250TE Dokumentacja Strona 19

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla System spawalniczy Clarke 250TE