Clarke 250TE Dokumentacja Pobierz pdf (Strona 20)

2. GAS WELDING

Fig.7

B. Welding Gas

(Models 130E, 135TE and 151TE ONLY)

The Gas Regulator Knob turns on a graduated plate, marked from 0 to 6.

With the knob pointer set to zero (0) the gas flow is OFF.

Set the Regulator to 3 or 4 which will provide a gas flow of 2-3 litres per

minute. This volume will provide adequate gas for a good weld without

porosity under normal conditions.

ALWAYS close the regulator by turning the knob to the 0 (zero) position

whenever you finish welding, or when changing gas cylinders.

C. Set the Controls

1. Models 110E, 110EN, 130EN & 135EN

These models are provided with two,

2-position switches and a rotary knob, as

shown in Fig. 8.

The rotary knob, with graduations from

0 to 10, is used to control the wire speed.

Two of the 2-position switches are marked

1- 2 and Max - Min respectively, and are

used to control the welding current

according to the type and thickness of

material to be welded, and in

accordance with the charts shown in the

‘Reference Tables’ on pages 24 and 25.

The remaining 2-position switch is the ON/

OFF switch

Fig.8

Workpiece

Thickness

(mm)

Welding

Position

Wire Speed

Adjustment

Welding

Position

Wire Speed

Adjustment

0.6 mm Gas Welding Wire 0.8 mm Gas Welding Wire

A B C A B C

0.6 - 0.8 MIN 1 5-6 MIN 1 5-6

0.8 - 1.0 MIN 2 5-6 MIN 2 5-6

1.0 - 1.2 MIN 3 5-6 MIN 3 6

1.2 - 2.0 MAX 1 6 MAX 1 6

2.0 - 3.0 MAX 2 7 MAX 2 7

>3.0 MAX 3 7-8 MAX 3 7-8

STEEL

A B C

0.9 MIN 1 5-6

0.9 - 1.0 MIN 2 5-6

1.0 - 1.2 MIN 3 5-6

1.2 - 2.0 MAX 1 6

2.0 - 3.0 MAX 2 7

>3.0 MAX 3 7-8

A B C

1.0 - 1.5 MIN 1 9

1.5 - 2.0 MIN 2 9

2.0 - 2.5 MIN 3 9

2.5 - 3.0 MAX 1 9

>3.0 MAX 2/3 10

Workpiece

Thickness

(mm)

Welding

Position

Wire Speed

Adjustment

0.8 mm Gas Welding Wire

ALUMINIUM

CONTROL SETTINGS - REFERENCE TABLES

B. MIGs 151TE & 160EN

Workpiece

Thickness

(mm)

Welding

Position

Wire Speed

Adjustment

0.9 mm Gas Welding Wire

SOFT STEEL

NO GAS

Connections should be

made as follows:

TORCH to the POSITIVE (+ve) terminal,

EARTH cable to the NEGATIVE (-ve)

terminal.

1 2 ... 15 16 17 18 19 20 21 22

Komentarze do niniejszej Instrukcji

Brak uwag

Clarke 250TE Dokumentacja Strona 20

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla System spawalniczy Clarke 250TE